四川米易海塔地区混合岩型铀矿流体包裹体特征     

郭锐  陈友良  刘凯鹏  郑玉文  胡漾 《矿物学报》2020,40(2):137-148

混合岩型铀矿是康滇地轴上最有希望取得找矿突破的铀矿类型,海塔地区的铀矿化即是该类型铀矿的典型代表。本文针对区内的长英质脉矿石、富晶质铀矿石英脉矿石和含矿热液石英脉中的石英流体包裹体进行了研究。结果表明,海塔地区混合岩型铀矿的成矿作用可分为2个阶段:早期混合岩化热液成矿阶段为高温、中低盐度流体,流体包裹体均一温度集中在380~540℃,盐度变化范围为16.15%~23.18%NaCl eqv,是区内铀成矿的主要阶段;晚期热液叠加改造成矿阶段为中低温、低盐度流体,流体包裹体均一温度集中在140~220℃,盐度变化范围为5.56%~23.18%NaCleqv,是区内富铀矿的形成阶段。流体包裹体的气相成分测试表明,长英质脉矿石石英包裹体中以CH4、CO2为主,其次为H2O和N2;而富晶质铀矿石英脉及含矿热液石英脉石英包裹体中以H2为主,部分含有CO2、CH4、H2O。氢、氧同位素研究表明,早期混合岩化成矿阶段的成矿流体可能为岩浆水与变质水的混合,而晚期热液叠加改造成矿阶段成矿流体中可能有大气降水的加入。  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

一种由粗到精的地面激光点云多层级配准方法     

王英  张云生 《测绘与空间地理信息》2020,(2):156-159

提出了一种综合利用快速点特征直方图(FPFH)描述符和同名点引导ICP优化的地面激光扫描(TLS)点云配准方法。该方法包括3个步骤:1)点云金字塔构建;2)基于FPFH的粗配准;3)同名点引导的ICP精配准。首先使用体素网格滤波器构造点云的金字塔结构,在粗配准时,FPFH描述符用于金字塔顶层上点云的鲁棒匹配,在此基础上,再进行两层级同名点引导的ICP精配准优化,使用3组典型TLS点云对进行实验,结果表明本文方法可以高效地完成TLS点云的配准。  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

基于圆柱多段拟合的隧道中轴线提取方法研究     

荆海峰  李广云  王力  杨文锋 《大地测量与地球动力学》2018,38(2):211-215

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理，并将点云按隧道走向分成不同区段；然后对各区段依据轴线与表面点云法线垂直关系，提取精度较低的中轴线；最后对各区段利用圆柱多段拟合，提取精度较高的中轴线。实验表明，隧道中轴线的提取在一定的采样区间具有较高的稳定性，对直线和弯曲的圆形隧道有良好的适用性，算法可靠，精度较高。  相似文献   

Inter-comparison of remote sensing platforms for height estimation of mango and avocado tree crowns     

《International Journal of Applied Earth Observation and Geoinformation》2020

To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R² = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R² = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km² due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R² = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R² = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km²–100 km²). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R² = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R² = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees.  相似文献   

激光跟踪仪在核电站主管道安装中的应用     

郭建兵 《北京测绘》2020,(1):123-125

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

基于裂隙尖端放电机制的深部岩体损伤自电特征分析   总被引：1，自引：0，他引：1       下载免费PDF全文

刘静  刘盛东  曹煜 《地球物理学报》2018,61(1):323-330

在大规模深部岩体损伤过程中发生的裂隙尖端放电现象往往引发地下雷电，对该现象发生机理、表现规律的揭示有助于地震、岩爆等的临灾预报.不同于在岩土体中液固耦合界面上发生的自然电场异常机理，在岩土体内部发生的裂隙尖端放电可谓是引发自然电场异常的另一重要微观机制.本文基于现有裂隙尖端放电的研究成果，详细阐述了裂隙尖端放电发生的过程，解释了岩体损伤过程中自然电场异常产生的微观机理，并结合室内实验成果论述了自电位的主要特征；进行了理论推导，认为在大尺度岩体连续损伤过程中，自电位具有含脉冲状波动并整体下降的特征；开展了原位测试，结果证明人工采掘扰动下的深部岩体连续破坏的过程中，自电位在破坏前期缓慢下降，在破坏过程中会出现脉冲状波动，随着破坏程度的加剧整体呈现波动中下降的规律，与理论推导、室内实验结论都相符.对比室内实验和原位测试成果发现，随着研究目标的空间尺度由mm级别扩展到m的级别，自电位波动的幅值也从数十个mV扩展到数百甚至上千mV，故认为在利用自电位波动规律来预测岩体破坏状态时，须受研究对象的空间尺度的约束.此外，在原位测试中发现，自电位对岩体损伤过程的响应较直流电阻率而言具有时域上的超前优势，并对此现象进行了解释.  相似文献   

基于三维激光扫描技术的钢结构扰度检测及应用     

宋云记  王晓民  王智 《测绘通报》2020,(12):160-163

钢结构在长期荷载及不均匀受力的作用下会产生空间变形，其中扰度是其重要的衡量指标。通常采用全站仪采集钢结构轴线上若干特征点进行分析、计算，由于钢结构特征点难以捕捉，测量存在误差，并且有限的空间离散点难以全面反应钢结构空间变形。本文采用徕卡RTC360三维激光扫描进行钢结构扰度测量；介绍了其作业流程及数据处理方法；利用标靶将各个测站的三维点云拼接成一个整体；采用拟合的方法提取空间特征点及轴线；利用三维点云构建空间模型，并与设计模型进行碰撞分析；可全面地反映钢结构的空间变形情况。  相似文献